12-7Installing Duralink64 NetWare ClientConnecting Clients to the NetWarePort Aggregation ServerFor optimum performance of NetWare Duralink64 PortAggregation, all clients (any brand) should increase their IPX retrycount.n For DOS clients using VLM or Novell Client32Type the following lines innet.cfg (indent the second line):protocol ipxipx retry count = 255n For Windows 95 Clients using Novell Client32From the Control Panel, locate NetWare Clients, and then enter255 under the IPX retry count in the IPX 32-bit Protocol tab.n For Windows NT Clients using Novell Client32Set the IPX retry count in the registry in NetWare WorkstationParameters. Use the following steps:a From the DOS prompt, type regedit to enter the RegistryEditor.b Double-click hkey_local_machine.c Double-click System.d Double-click CurrentControlSet.e Double-click Services.f Double-click NetWare Workstation.g Double-click Parameters.h Double-click Retry Count to enter the Edit DWORD Valuemenu.i Change base to decimal, and then change value data to 255.j Click OK.k Close the Registry Editor.l Restart the system.r
