8-2DuraLAN Fast Ethernet NICs User’s GuideConfiguring the PortsIn the Adaptec New Hardware Found window, each port isassigned to Autodetect, the default connection type that will alwaysdetect port connection and negotiate a compatible speed andtransmission mode.1 In the Adaptec New Hardware Found window, make sure allthe DuraLAN NIC ports appear.Figure 8-1. This window identifies each port’s PCI bus and PCI slotNote: Generally, PCI Bus 0 is the PCI Bus on themotherboard. PCI Bus 1 or above is an ANA-62022 orANA-62044 NIC. The PCI Slot represents the port onthe NIC starting from the top. The top port starts atPCI Slot 4.2 In the New Available NIC Ports Available box, click theappropriate port.
