3-6PCI Ethernet and Fast Ethernet AdaptersPCI Ethernet and Fast Ethernet Adapters User’s GuideStock Number: 511472-00, Rev. A Page: 3-6Print Spec Number: 496708-00Current Date: 5/5/97 ECN Date: 5/97Diagnostic LEDsDiagnostic Light Emitting Diodes (LEDs) provide information aboutlink status and network activity. See the table below for details oneach LED function.Link Status (L.S.)LED lights when the adapter’s driver is loaded, and indicates that anelectronic link exists between the adapter device and repeater or switch.Speed Ports Color10 Mbps RJ-45 Green, with the exception of the Quartet and theUltimate Combo—where it is yellow.100 Mbps RJ-45 Green. The LED blinks on T4 adapters.Network Activity (N.A.)LED lights up to signal the presence of incoming or outgoing traffic.Speed Ports Color10 Mbps RJ-45, BNC, AUI Yellow100 Mbps RJ-45, BNC, AUI YellowSpeed100 (ANA-6911A/TX)The Speed100 LED is green. When ON , it indicates 100Mb/s, when OFF, itindicates 10Mb/s.lsnana lslsnalsnalsna Speed100na, p1na, p2na, p3na, p4ls, p1ls, p2ls, p3ls, p4ANA-6901 Combo*na lsQuartet ANA-6911A/TXSC Fiber Optic* ST Fiber Optic* Ultimate Combo*10Mbps and 100Mbps single speed adapters provide only 1 link status and 1 netwo
