4-12PCI Ethernet and Fast Ethernet AdaptersPCI Ethernet and Fast Ethernet Adapters User’s GuideStock Number: 511472-00, Rev. A Page: 4-12Print Spec Number: 496708-00Current Date: 5/5/97 ECN Date: 5/97Remove Existing Adaptec Ethernet Drivers6 Click the Adapters tab in the Network Setup dialog box.7 To remove any currently installed Adaptec or Cogent PCIadapters highlighting the adapter, click Remove, then clickOK. Repeat until all Adaptec or Cogent PCI adapter driversare removed.8 Click Close to close the Network dialog box.9 Click Yes to restart your computer.Note: When you restart Windows NT, a message mayindicate that at least one service failed to start. This messagewill not appear after you add the new Duralink drivers inthe following steps. Click OK.Adding Standard Drivers10 Double-click the My Computer icon.11 Double-click the Control Panel icon.12 Double-click the Network icon.13 Click the Adapters tab in the Network dialog box.Note: Do not allow Network setup to autodetect thenetwork adapter.14 Click Add.15 Click Have Disk.16 At the prompt Insert disk with software provided by thesoftware or hardware manufacturer, insert the disk with theWindows NT driver. Enter the path to the directory where thedriver and OEMSETUP file are located. Click OK.17 Select the OEM Option dialog box. Select the adapter type (forexample, 6911, 6911A, 6944A, and so forth) or Adaptec PCIEthernet adapter. Click OK.
