4-18PCI Ethernet and Fast Ethernet AdaptersPCI Ethernet and Fast Ethernet Adapters User’s GuideStock Number: 511472-00, Rev. A Page: 4-18Print Spec Number: 496708-00Current Date: 5/5/97 ECN Date: 5/9725 Click Continue. The Duralink Setup by Adaptec dialog boxappears.26 If SNMP has not been set up on this computer you will receivethe following Setup Message: Install the NT SNMP serviceand use configure option to configure Server related MIBs.Click OK.27 Click Close to close the Network dialog box. The protocol andservice binding information for the primary and backup portswill be written.28 Remove any floppy disks and click Yes to restart yourcomputer now.Note: You can now attach cables from both adapters to acommon hub.SNMP Management StationThe following MIB files must be compiled on the SNMP Manage-ment station to manage the ANA-6911:n ADPTDMI.MIB - Adaptec Ethernet DMI/SNMP MIBn FAILOVER.MIB - Adaptec Duralink Failover MIB
