4-28PCI Ethernet and Fast Ethernet AdaptersPCI Ethernet and Fast Ethernet Adapters User’s GuideStock Number: 511472-00, Rev. A Page: 4-28Print Spec Number: 496708-00Current Date: 5/5/97 ECN Date: 5/97UNIX DriversThe Adaptec adapters support the following UNIX products (sup-port for some UNIX versions not available on every adapter):n SCO UNIX System 3.2 v4.2n SCO Open Desktop 3.0/5.0n SCO OpenServer 5.0 (ANA-6911A/TX, ANA-6901, andANA-6944A/TX only)n SCO Unixware SMP (ANA-6911A/TX, ANA-6901, andANA-6944A/TX only)n Sun Solaris 2.4/2.5n NextStep 3.2/3.3The list of supported UNIX systems is updated periodically; contactAdaptec if your type of UNIX is not listed here. The UNIX driversand installation instructions are available from Adaptec’s BBS, Com-puServe Forum, World Wide Web, and FTP sites.The Sun Solaris and NextStep drivers are available at the WorldWide Web sites of the respective operating system vendors. See theappropriate \readme.txt file for your UNIX operating system.SCO OpenServer 5.0The ANA-6944A/TX, ANA-6901A, and the ANA-6911A/TX UNIXdrivers support SCO OpenServer 5.0.Installing the SCO OpenServer Driver1 Insert the Unix Drivers diskette into the first floppy drive(usually A).2 Make a directory for the driver, as follows:mkdir adaptec3 Change to the directory you just created, as follows:chdir adaptec4 Copy the files from the floppy diskette to the hard disk, asfollows:doscp a:\sco5_0\*.*.
