Chapter 11: Managing Controllers, Disk Drives, and Enclosures ● 122Viewing Component PropertiesClick on any component in the main window of Adaptec Storage Manager,then click the Properties button (shown at right) to view version numbers,status, model numbers, and other information about that component.The properties listed vary, depending on which type of component you select. The examplesbelow show the Hard Disk Drive (left) and Logical Drive (right) Properties windows.Blinking a ComponentYou can blink the LEDs on enclosures, or disk drives inside enclosures, to identify where theyare physically located in your storage space. This table describes how to blink specificenclosures and disk drives.To blink a component:1 In Adaptec Storage Manager, right-click the component, then click Blink....Note: If the component you select (for instance, a controller) doesn’t support the blinkfunction, the Blink... option won’t appear in the menu.The LEDs on the disk drives or enclosures begin to flash.To Blink... Right-click...The disk drive Disk Drive iconAll disk drives connected to that controller Controller icon (in the Enterprise View or in thePhysical Devices View)The enclosure Enclosure Management Device iconAll disk drives included in a logical drive Logical Drive iconAll disk drives included in all the logicaldrives on a selected controllerText—In the Logical Devices View of acontroller with multiple logical drivesAll disk drives connected to selectedcontroller portsText—In the Physical Devices View of acontroller with multiple portsAll disk drives connected to a selectedcontroller channelText—In the Physical Devices View of acontroller with multiple channelsAll disk drives connected to a selectedcontroller connectorText—In the Physical Devices View of acontroller with multiple connectors
