Getting Started Step 5: Customizing Adaptec Storage Manager ● 59To log in to a remote system:1 From the menu bar, click Remote, then select Add.The Add Managed System window opens.2 Ensure that Managed System (Internal RAID) is selected in the Type drop-down menu,then enter the host name or TCP/IP address of the remote system.3 Enter the startup port number of the remote system. The default port number is 34571.4 If prompted, enter your user name and password. (User names and passwords are casesensitive.)To save this user name and password, click inside the Save user name/password box.5 Click Connect.Adaptec Storage Manager connects to the remote system and adds it to the list of managedsystems in the Enterprise View.6 To manage the remote system, select it in the Enterprise View and enter your user nameand password if prompted.To create logical drives on your remote systems, see Building Your Storage Space on page 45.Removing a Remote SystemIf you no longer want to monitor a remote system, you can remove it from the Enterprise Viewof Adaptec Storage Manager.Removing a remote system does not cause it to fail.To remove a remote system:1 In the menu bar of the main window, select Remote, select Remove managed system, thenclick the system you want to remove.The Remove Managed System window opens.2 If you want to continue receiving events from the remote system after it’s been removedfrom the local system, select Continue to receive events from the remote system from thedrop-down menu.3 Click OK.The remote system is removed from the Enterprise View of Adaptec Storage Manager.
