Getting Started Step 2: Installing and Starting Adaptec Storage Manager ● 29Starting Adaptec Storage Manager on Linux1 Type the following command to change to the Adaptec Storage Manager installationdirectory:cd /usr/StorMan2 Type the following command and press Enter:sh StorMan.sh3 When the Log In dialog box appears (see page 28), enter the user name and password thatyou use to log on to your system, then click Connect.Note: Each user name has a permission level associated with it. See UnderstandingPermission Levels on page 32 for more information.Starting Adaptec Storage Manager on NetWareTo start Adaptec Storage Manager on the NetWare operating system, type the LOAD RAIDMANcommand.Starting Adaptec Storage Manager on UnixWare or OpenServerTo start Adaptec Storage Manager:1 Change to the directory where Adaptec Storage Manager is installed:cd /opt/RaidMan2 Launch the Adaptec Storage Manager script:sh RaidMan.shStarting Adaptec Storage Manager on SolarisTo start Adaptec Storage Manager:1 Change to the directory where Adaptec Storage Manager is installed:cd /usr/StorMan2 Launch the Adaptec Storage Manager script:sh StorMan.sh
