Chapter 6: Managing Logical Drives and Hot Spares ● 76Verifying and Fixing a Logical DriveNote: To verify a logical drive without fixing it, see page 77.While Adaptec Storage Manager verifies and fixes a logical drive, you can’t complete any othertasks on the controller. Because the verification can take a long time to complete, you maywant to schedule it as a task to be completed overnight or on a weekend.To verify and fix a logical drive:1 In the Enterprise View, click the controller associated with the logical drive.2 In the Logical Devices View, click the logical drive.3 In the menu bar, select Actions, then click Verify with fix.4 To begin the verification immediately, click Yes.To schedule the verification, click Schedule, then set the date and time. You can alsochoose to set the verification as a recurring task. (For more information, see page 111.)Note: Don’t power off the system while the verification is in progress. If you do, the verificationwill stop.While the verification is in progress, the logical drive is shown as an animated icon(as shown at right) to indicate that the task is in progress.When the verification is complete, an event notice is generated in the local system’s eventlog (and broadcast to other systems, if you have event notification set up—see UsingNotifications to Monitor Status on page 94).You can now continue working on the controller.
