Chapter 8: Monitoring Your Storage Space ● 97If the test fails:a Ensure that the receiving system is powered on and running Adaptec StorageManager.b Open the receiving system’s System Properties window (see Step 3 on page 97) anddouble-check the TCP/IP address and port number.c Try sending the test event again.Managing the Event Notification ListThis section describes how to manage systems in the Notification List:● To add a system to the Notification List, see page 94.● To modify a system’s connection information, see the following section.● To remove a system from the Notification List, see page 97.Modifying a System’s Address, Host Name, or Notification LevelIf you want to specify the notification level for a system, or if the TCP/IP information or hostname of a system changes, update its properties in the Notification Manager.Note: Does this system receive event notifications from more than one other system? Ensure youenter the updated information in the Notification Manager of all affected systems.To modify system information:1 Open the Notification Manager. (See page 94.)2 In the Notification List, click on the system you want to modify.3 In the System Properties window, enter the new information or select a new notificationlevel in the Event Type drop-down menu, then click OK.The Notification List shows the modified information.Removing a System from the Notification ListYou can remove any system (including the local system) from the Notification List. Once asystem has been removed, logged notifications from the local system are no longer sent to it.To remove a system from the Notification List:1 Open the Notification Manager. (See page 94.)2 In the Notification List, click on the system you want to remove.
