Chapter 6: Managing Logical Drives and Hot Spares ● 72Fine-tuning Logical DrivesYou can fine-tune a new or existing logical drive to meet your needs by changing its name oradjusting the Advanced settings described in this section. (Not all options are available for allcontrollers or all RAID levels.)Renaming a Logical DriveTo change the name of a logical drive:1 In the Enterprise View, click the controller associated with the logical drive.2 In the Logical Devices View, click the logical drive.3 In the menu bar, select Actions, then click Change logical device name.4 Type the new name, then click OK.The logical drive is updated with its new name.Adjusting a Logical Drive’s Advanced SettingsNote: The default settings in Adaptec Storage Manager are optimal for most users and storagespaces. Only advanced users should change the settings described in this section.To fine-tune a logical drive:1 Open the list of Advanced settings.If you are creating a new logical drive, follow the instructions in Step 6 on page 50.If you are modifying an existing logical drive:a In the Enterprise View, click the controller associated with the logical drive.b In the Logical Devices View, click the logical drive.c In the menu bar, select Actions, then click Expand or change logical device (shown inthe figure in Step 3 on page 72.d Click Next, then click Advanced settings.
