Getting Started Step 3: Exploring Adaptec Storage Manager ● 41Hold your cursor over any disk drive to see its status, port/connector/ID number, andmaximum speed. You can also click the arrow, shown at right, to see this sameinformation for all the disk drives at the same time. To reveal further information, use theView buttons to change how the disk drives are displayed, as described in Revealing More DiskDrive Information on page 42.A disk drive shaded in light blue is not part of any logical drive. A disk drive shaded halflight/half dark blue (as shown at right) has some space allocated to a logical drive, andsome space available.To view the logical drives associated with a particular disk drive, see Using the Logical DevicesView on page 41.If your storage space includes an enclosure, its enclosure management device isrepresented by the icon shown at right.Using the Logical Devices ViewWhen you select a controller in the Enterprise View, information about the logical drives andarrays associated with that controller appear in the Logical Devices View. (A logical drive is agroup of physical disk drives that your operating system recognizes as a single drive. For moreinformation, see Understanding Logical Drives on page 68.)The RAID level of a logical drive is indicated by the number inside the logical drive’s icon.For instance, the logical drive shown at right has RAID 1. Logical drives protected by hotspares have plus signs (+) beside them, as shown at right.Hold your cursor over any logical drive to see its name, status, and size. You can also clickthe arrow, shown at right, to view this same information for all the logical drives at once....28 disk drives... ...from which 3 logical driveshave been created.Controller 2 is connected to...
