Getting Started Step 4: Building Your Storage Space ● 5313 Click Apply, then click Yes.Adaptec Storage Manager builds the logical drive(s), indicated by a magnifying glassmoving across the new logical drive icon in the Logical Devices View. The configuration issaved on the Adaptec controller and on the physical drives.14 Repeat Steps 1 to 13 for each controller on your system.15 Partition and format your logical drives. See page 48 for more information.If your storage space comprises one or more Adaptec RAID controllers on a single system,building is complete. Continue with Managing Your Storage Space on page 56.If you have installed Adaptec RAID controllers on more than one system and wish to add themto your storage space, continue with Including More Systems in Your Storage Space on page 53.Including More Systems in Your Storage SpaceNote: Adaptec Storage Manager must be installed on every system that will be part of your storagespace.If you have installed Adaptec RAID controllers on more than one system, to continue buildingyour storage space:● From each individual system, log in to Adaptec Storage Manager and repeat Steps 1 to 15 tocontinue building your storage space, or● From your local system, log in to all the other systems as remote systems (see page 58), thenrepeat Steps 1 to 15 to continue building your storage space.The maximum number of supported RAID controllers varies depending on your operatingsystem. See RAID Controller Support on page 55 for more information.When your storage space is complete, continue with Managing Your Storage Space on page 56.A magnifying glass means that a logical drive is being built.It disappears once the logical drive has been created.
