Axis 2460 User Manual

Also see for 2460: Brochure & specs

Contents

AXIS 2460 User’s Manual Installing the AXIS 2460 Network DVR 13Using the appropriate method for your operating system, assign your product with aunique IP address (do not use the example below) from a computer on your network, asfollows:Note: On some UNIX systems, the arp command can be located in a directory that is not onthe command path.You will now see ‘Request timed out...’ messages repeatedly returned in the commandwindow.❺Now turn the main power switch on the rear panel to I.❻After approximately 30-40 seconds, the message ‘Reply from 123.123.123.123..’or similar, is returned within the prompt window. Check that the Power Indicator ispermanently lit and that the Network Indicator flashes intermittently.❼Exit Ping. The IP address has now been set and you are ready to access the AXIS 2460from your browser, as described below.Windows - Start a command prompt and type these commands:Syntax:arp -s ping -t Example:arp -s 123.123.123.123 00-40-8c-10-00-86 123.123.123.122ping -t 123.123.123.123UNIX - Type these commands in your command line:Syntax:arp -s tempping Example:arp -s 123.123.123.123 00:40:8c:10:00:86 tempping 123.123.123.123