Axis 2460 User Manual

Also see for 2460: Brochure & specs

Contents

Installing Hard Disks AXIS 2460 User’s Manual62Appendix F - Installing Hard DisksThe AXIS 2460 can be fitted with various brands of commercially available IDE hard disk.For more information about recommended brands, please visit www.axis.com and see theproduct pages for the AXIS 2460.Follow these instructions to install a disk:1. Switch off power to the unit. First press the power button on the front panel until itturns amber and wait until the unit shuts down. Then set the main power switch on therear panel to 0.2. Mount the disk(s) in the holder(s).3. Set the disk in the upper position to master. If installing a second disk on the samecable (channel) set this to slave. Exactly how this is done varies from one type of diskto another. Refer to the documentation provided with the disk.4. Remove the cover from the AXIS 2460. Connect the IDE-cable to the disk(s) andconnect the other end to the motherboard.5. Connect the power cable to the disk(s).6. Screw the disk holders in place inside the unit, using 2 screws on each side. Use amagnetic screwdriver.Connection forIDE Channel BFasten withscrews hereSet upper diskto Master.Connection forIDE Channel A