Axis 2460 User Manual

Also see for 2460: Brochure & specs

Contents

AXIS 2460 User’s Manual The Factory Default Settings 49The Factory Default SettingsIn certain circumstances, it may be necessary to reinstate the Factory Default settings foryour AXIS 2460. This is performed in one of two ways:• By pressing the Factory Default Button, located on the rear panel. This option will resetALL the parameters currently configured in the unit, i.e. network settings, events, etc.• By clicking the Restore button from the Maintainence page under System Options. Thisaction will reset most of the unit’s parameters but will save the IP-address, the Subnetmask, the Default Router and the Mac (Ethernet) address.Follow the instructions below to reinstate the product factory default settings using theControl Button:1. Switch off the AXIS 2460 by pressing the Power button on the front panel.2. Press and hold the Factory Default Button pressed, and press the Power button again.3. Keep the Factory Default Button pressed until the Status Indicator displays yellow (notethat this may take up to 15 seconds), then release the Control Button. When the StatusIndicator displays green (which can take up to several minutes) the AXIS 2460 willthen have been reset to the original factory default settings.Note: Both methods of resetting to the factory default settings will also format all the con-nected hard disks.