Axis 2460 User Manual
Also see for 2460: Brochure & specs
                                                                        | |
Contents
|
Other IP Setup Methods AXIS 2460 User’s Manual60Notes for Macintosh UsersImportant!The AXIS 2460 supports TCP/IP over Ethernet, or PPP Modem dial-up. You must useTCP/IP on your Macintosh network, as there is no support for AppleTalk.When using the AXIS 2460 on a Macintosh, please observe the following points:• The DVR has a default IP address of 192.36.253.80.• Assign a temporary IP address to a Mac workstation in the same subnet (e.g. 192.36.253.81)and then connect to the DVR.• Reset the correct IP address for the Macintosh workstation.• Changing the IP address for a Macintosh does not require a reboot.The AXIS 2460 was developed for use with Microsoft Internet Explorer (5.0 or higher) running on Win-dows 98/ME/XP/NT or 2000. This is because the viewing of live images and the built-in Video Player bothrequire an ActiveX control for their function, something which is currently only supported by InternetExplorer. Other browsers and other operating systems can be used for installing the unit and also foradministration purposes, but the Video Player will not function correctly. |
Related manuals for Axis 2460
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine