Random Access Adjustment Mode6-35975597 BARCODATA 808S 110397Selecting Setup PatternIf an external source is connected to the projector, this menu will be displayed. Push thecontrol stick forward or backward to highlight the desired setup pattern and then pressENTER.Genlocked pattern : internally generated cross hatch pattern, locked on the external source.Internal # pattern : internally generated cross hatch pattern and locked on internal generatedsync signals. (No external source necessary)Choose a setup patternfrom below :SELECTED SOURCEGENLOCKED PATTERNINTERNAL # PATTERNSource 01Select with orthen to return.ENTER continues to Random Access Adjustment Mode or Internal # PatternSelectionEXIT returns to Path Selection menuADJUST returns to Operational modeIf no external source is connected to the projector, the internal cross hatch pattern menu willbe displayed.Note: The menus in this manual are created for an external source, connected to one of theinputs, and the 'Genlocked Pattern' is selected.Internal Cross Hatch PatternThe Internal # pattern menu will be displayed if the internal cross hatch pattern has beenselected or if no source is connected to the projector.The table below lists the 8 fixed factory preset frequencies available. Another 8 blocks arecustom programmable.Push the control stick forward or backward to highlight the desired cross hatch frequency.Use the left and right arrow to scroll to another page. Press ENTER. if the desired block isselected.kHz/Hz15.6/50 PAL/SECAM15.7/60 NTSC31.2/50 EDTV31.5/60 IDTV31.2/50 HDTV EUREKA31.5/60 HDTV ATV33.7/60 HDTV HIVISION15.8/60 EGA 121.8/60 EGA 261.0/76 VGA 1,235.5/87 VGA 448.5/60 SUPER VGA 144.2/70 SUPER VGA 261.0/76 SUPER VGA 363.9/76 APPOLLO22.2/60 MAC CLASSICINTERNAL # PATTERNkHz / Hz15.6/50 PAL/SECAM15.7/60 NTSC31.2/50 EDTV31.5/60 IDTV31.2/50 HDTV EUREKA31.5/60 HDTV ATVSelect with orscroll with or to accept to returnENTER continues to the Random Access Adjustment Mode.EXIT returns to the Setup Pattern Selection menu.
