Random Access Adjustment Mode6-10 5975597 BARCODATA 808S 110397Left-Right (east-west) AdjustmentsLeft-right adjustments affect only the vertical lines of the projectedimage. Only the green image is displayed while making left-rightadjustments. The red and blue images will automatically be correctedin the same manner. Convergence corrections are automaticallydisabled for the duration of these adjustments.The following adjustments can be executed :- Vertical Centerline Bow- Vertical Centerline Skew- Side Bow- Side Keystone- Seagull correctionPush the control disk up or down to highlight LEFT-RIGHT (E/W) onthe geometry menu and then press ENTER.ENTER will select Left-Right adjustment menu.EXIT returns to random access adjustment mode main menu.ADJUST returns to operational mode.Select with orthen to return.GEOMETRYH PHASERASTER SHIFTLEFT-RIGHT (E-W)LEFT SIDE CORRECTIONTOP-BOTTOM (N-S)H SIZEV LINEARITYV SIZEBLANKINGSelect with orthen to return.LEFT-RIGHTV CENTERLINE BOWV CENTERLINE SKEWSIDE BOWSIDE KEYSTONESEAGULL CORRECTIONWarning : Use this correction toadjust the right side of the image !The warning : "Use this correction to adjust the right side of the image"appears on the screen when selecting 'Side Bow' or 'Side Keystone'.When the right side is correctly adjusted, use 'Left Side Correction' tocorrect the left side of the image.All adjustments are indicated on the screen with the function name,a bar scale and a number between 0 and 100.Adjust the next alignments until the vertical lines are straight. For sidebow and side keystone, look only to the right side of the image.To enter an alignment, push the control disk up or down to highlighta function and press ENTER to activate this function.Press EXIT to return.LEFT-RIGHTSelect with orthen to return.V CENTERLINE BOWV CENTERLINE SKEWSIDE BOWSIDE KEYSTONESEAGULL CORRECTIONCorrects for curvature of the vertical lines in the middleof the image.Corrects the tilting of the vertical lines in the middle ofthe image.Corrects the keystone geometry correction of the vert. lineson the right sideCorrects for curvature of the vertical lines on the right sideCorrect by pushingthe control stick to therightCorrect by pushingthe control stick to theleft
