Barco R9002031 Owner's Manual

Also see for R9002031: Installation manual

Contents

Barco R9002031 Owner's Manual Manual pdf 40 page image

Service Mode7-2 5975597 BARCODATA 808s 110397IdentificationHighlight 'Identification' with the control disk and press ENTER.The 'Identification' screen gives information concerning :- Projector address. To change the address of your projector,contact a qualified service technician.- Software version.- Configuration.Possible installations :* Front-ceiling* Front-table* Rear-ceiling* Rear-table- Baud rate PC : transfer speed for communication with an IBM PC(or compatible) or MAC. The baud rate of the projector must be thesame as the baud rate of the connected computer. When there is adifference, contact a qualified servicetechnician to make the appropriate changes.- Text ON/OFFIndicates in operational mode if the bar scale and number indicatorwill be displayed and if warnings and failures will be displayed.ON : displayedOFF : not displayedThe status can be changed by pressing the 'TEXT' key once on theRCU.- Serial no. : indicates the fabrication number of the projector. Thisnumber can be useful when calling for technical assistance.Copy a blockThe copy a block function copies the settings of a selected block intothe active block.Highlight copy a block with the control disk and press ENTER.ENTER will select the highlighted item.To copy the settings of a closed block to the block you are workingon (active block), use the control stick to select a block.All existing settings will be overwritten with the new settings.Press ENTER to copy the selected block. A confirmation screen willbe displayed.If you are certain you wish to copy the contents of the selected blockinto the active block, press ENTER.EXIT cancels the copy procedure and returns without copying theblock.Select with orthen to return.SERVICE MODEProj. address : 001Soft. Version : 6.00Config. : CeilingFrontBaudrate PC : 9600Text : ONSerial No. : 103589552DATA 808sIDENTIFICATIONCOPY A BLOCKDELTE A BLOCKDELETE ALL BLOCKSCHANGE PASSWORDCHANGE LANGUAGERUN TIMESET TO MIDPOSITIONCONVERGENCE MIDDYNAMIC ASTIGMATISMMORE...Select with orthen to return.SERVICE MODESelect with or to copy to return.COPY MODENr. Src Fh Fv inp conf1 1 15.6 50 video FC2 3 31.2 60 RGB3S RT3 - 15.6 50 intern FC4 2 31.5 50 RGB3S FC5 - 33.7 60 intern FC678Active block nr. 1COPY BLOCKAll settingsin current blockwill be overwritten ! to confirm to cancelIDENTIFICATIONCOPY A BLOCKDELTE A BLOCKDELETE ALL BLOCKSCHANGE PASSWORDCHANGE LANGUAGERUN TIMESET TO MIDPOSITIONCONVERGENCE MIDDYNAMIC ASTIGMATISMMORE...