Barco R9002031 Owner's Manual

Also see for R9002031: Installation manual

Contents

Barco R9002031 Owner's Manual Manual pdf 42 page image

Service Mode7-4 5975597 BARCODATA 808s 110397Change passwordThis item is password protected.Highlight 'change password' with the control disk and press ENTER.The current password is displayed. The new password must consistof 4 digits between 0 and 9. Push the control disk to the left or to theright to select the digits to be changed. Use the numeric keys to enterthe new digits.Press ENTER to save the new password. Before saving the newpassword, a confirmation screen will be displayed.Press EXIT to return to the Service menu without saving the newpassword.Change LanguageThe 'Change Language' function offers the possibility to change thelanguage of the screen menus to :- English- Spanish- French- GermanPush the control disk up or down to highlight 'Change language' andpress ENTER to select the language menu.Push the control disk up or down to select the desired language andpress ENTER to change the language.Select with orthen to return.SERVICE MODEUse and to select,and reprogramwith numeric keys. to confirm to returnPASSWORDEnter new password :0 0 0 0Password will bereprogrammed as xxxx to confirm to cancelCHANGE PASSWORDIDENTIFICATIONCOPY A BLOCKDELTE A BLOCKDELETE ALL BLOCKSCHANGE PASSWORDCHANGE LANGUAGERUN TIMESET TO MIDPOSITIONCONVERGENCE MIDDYNAMIC ASTIGMATISMMORE...When the displayed password is correct, press ENTER to save.If not correct, press EXIT to cancel the saving.Select with orthen to return.SERVICE MODEIDENTIFICATIONCOPY A BLOCKDELTE A BLOCKDELETE ALL BLOCKSCHANGE PASSWORDCHANGE LANGUAGERUN TIMESET TO MIDPOSITIONCONVERGENCE MIDDYNAMIC ASTIGMATISMMORE...LANGUAGEENGLISHESPAÑOLFRANCAISDEUTSCHSelect new languagewith orthen to return.Select with orthen to return.SERVICE MODEIDENTIFICATIONCOPY A BLOCKDELTE A BLOCKDELETE ALL BLOCKSCHANGE PASSWORDCHANGE LANGUAGERUN TIMESET TO MIDPOSITIONCONVERGENCE MIDDYNAMIC ASTIGMATISMMORE...Run timeHighlight 'run time' with the control disk and press ENTER to displaythe amount of time the projector has played since its first start up atthe factory.Note : all projectors leave the factory after a burn-in period ofapproximately 100 hours.Press EXIT to return the service mode menu.RUN TIME105 h