Random Access Adjustment Mode6-55975597 BARCODATA 808S 110397Sync Fast/Slow AdjustmentThe sync function is used to minimize horizontal jittering or tearing atthe top to the displayed image.Highlight SYNC by pushing the control disk up or down and pressENTER to toggle between FAST and SLOW.Note: SYNC is normally used in the SLOW position. For Video andS-Video the sync is automatically set to FAST. Select with or to accept to return.PICTURE TUNINGCOLOR BALANCESYNC : FASTPEAKINGCLAMP TUNING : normalLINE DOUBLERENTER will toggle Sync between FAST and SLOW.EXIT will return to the random access selection menu.Select with or to accept to return.PICTURE TUNINGCOLOR BALANCESYNC : FASTPEAKINGCLAMP TUNING : normalLINE DOUBLERSelect with orthen to return.PEAKINGOFFLOW FREQUENCYMID FREQUENCYHIGH FREQUENCYClamp TuningHighlight CLAMP TUNING by pushing the control disk up or downand press ENTER to toggle between NORMAL and RESTORA-TION.Select Normal : - For all standard sources and all sources with abackporch > 0.8μs,- For sources with noise and spikes in the signal.Select Restoration: - For standard sources with a backporch between0.4 μs and 0.8 μs,- For sources with sync separate or sync on Green.Select with or to accept to return.PICTURE TUNINGCOLOR BALANCESYNC : FASTPEAKINGCLAMP TUNING : normalLINE DOUBLER :ONPeakingPeaking improves the contours in an projected image.Highlight PEAKING by pushing the control disk up or down and pressENTER to display the peaking menu.During the creation of new settings for a RGB source the correspond-ing peaking is switched on as default.For frequencies between :15 kHz - 45 kHz : Low frequency peaking.45 kHz - 85 kHz : Mid frequency peaking.85 kHz - 110 kHz :High frequency peaking.If another peaking is desired, use the control disk to highlight 'low','mid' or 'high' frequency or to switch off the peaking.
