Random Access Adjustment Mode6-155975597 BARCODATA 808S 110397Blanking AdjustmentsBlanking adjustments affect only the edges of the projected imageand are used to frame the projected image on to the screen and to hideor black out unwanted information (or noise). A 0% on the bar scaleindicates no blanking.To start up the Blanking adjustments, follow the next procedure :Push the control disk up or down to highlight BLANKING on theGeometry menu and then press ENTER. Select with orthen to return.GEOMETRYH PHASERASTER SHIFTLEFT-RIGHT (E-W)LEFT SIDE CORRECTIONTOP-BOTTOM (N-S)H SIZEV LINEARITYV SIZEBLANKINGSelect with orthen to return.BLANKINGTOPBOTTOMLEFTRIGHTBottom blankingTop blankingRight blankingLeft blankingThe following blanking corrections are possible :- Top blanking- Bottom blanking- Left blanking- Right blankingTherefore :- If the internal # pattern was selected, this pattern remains on thescreen.- If the genlocked pattern was selected, the external sourcewill be displayed.Adjust the next blanking alignments until the image is correctlyframed or the unwanted information is blanked out.To enter a blanking alignment, push the control disk up or down tohighlight a function and press ENTER to activate this function.Press EXIT to return.BLANKINGSelect with orthen to returnTOPBOTTOMLEFTRIGHTAdjustment of the blanking on the left sideAdjustment of the blanking on the right sideAdjustment of the blanking on the of the imageCorrect by pushing the control stick forwardor backwardAdjustment of the blanking on the bottom of the imageCorrect by pushing the control stick to theright or to the left
