Random Access Adjustment Mode6-8 5975597 BARCODATA 808S 110397Geometry AdjustmentsThe geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other colorimages : Left-right (EW) and Top-Bottom Corrections, Blanking, Horizontal Amplitude, Vertical Amplitude, Vertical Linearity and HorizontalPhase.Highlight GEOMETRY by pushing the control disk up or down andpress ENTER to display the geometry menu.Select with orthen to return.RANDOM ACCESSADJUSTMENT MODEPICTURE TUNINGGEOMETRYCONVERGENCEFOCUSINGCOLOR SELECTORBITINGCONTR. MODULATIONSOFT EDGESelect with orthen to return.GEOMETRYH PHASERASTER SHIFTLEFT-RIGHT (E-W)LEFT SIDE CORRECTIONTOP-BOTTOM (N-S)H SIZEV LINEARITYV SIZEBLANKINGENTER will display Geometry menu.EXIT will return to Internal Crosshatch Selection or SetupPattern Selection Menu.ADJUST returns to operational mode.Within the Geometry Adjustment menu, the following adjustmentsare available :- Horizontal Phase (not for internal # pattern).- Raster Shift- Left-Right Corrections- Left Side Corrections- Top-Bottom Corrections- Horizontal Size- Vertical Linearity- Vertical Size- BlankingThe convergence corrections are disabled during geometry correc-tions. The blanking corrections are only enabled during the blankingadjustments.Horizontal Phase AdjustmentPush the control disk up or down to highlight H PHASE on Geometrymenu and then press ENTER.Note : No horizontal phase adjustment is available on the internal #pattern.For external sources :If the raster shift is correctly adjusted, the H Phase text box isprojected in the middle of the raster. At that moment, the "><" iconindicates the middle of the raster.Adjust the H Phase control until the middle of the projected image isequal with the middle of >< icon.Note :- If the genlocked pattern was selected, the external source will bedisplayed.A bar scale and a number indicator (between 0 and 100) on thescreen give a visual indication of the horizontal phase adjustment.H PHASE><70H PHASE70><Select with orthen to return.GEOMETRYH PHASERASTER SHIFTLEFT-RIGHT (E-W)LEFT SIDE CORRECTIONTOP-BOTTOM (N-S)H SIZEV LINEARITYV SIZEBLANKINGH PHASE><70ENTER continues to geometry menu .Push the control stick tothe right to correctPush the control stick tothe left to correct
