Standard Features AW00097603000234 Basler aviator GigE10.12 Mirror ImagingThe camera’s reverse X and reverse Y functions let you flip the captured images horizontally and/or vertically before they are transmitted from the camera.Note that the reverse X and reverse Y functions may both be enabled at the same time if so desired.10.12.1 Reverse XThe reverse X feature is a horizontal mirror image feature. When the reverse X feature is enabled,the pixel values for each line in a captured image will be swapped end-for-end about the line’s cen-ter. This means that for each line, the value of the first pixel in the line will be swapped with the valueof the last pixel, the value of the second pixel in the line will be swapped with the value of the next-to-last pixel, and so on.Figure 54 shows a normal image on the left and an image captured with reverse X enabled on theright.On color models of the camera, when either the reverse X feature or the reverseY feature or both are used, the alignment of the color filter to the image remainsBayer GB. The camera includes a mechanism that keeps the filter alignmentconstant when these features are used. For more information about the color filter,see Section 8.1 on page 109.Fig. 54: Reverse X Mirror ImagingNormal Image Reverse X Mirror Image
