Physical Interface AW0009760300038 Basler aviator GigE5.7 Input Line Description5.7.1 Voltage Requirements:Voltage Levels When a Standard Power and I/O Cable is UsedWhen a standard power and I/O cable is used, the following voltage requirements apply to thecamera’s I/O input lines (pins 3 and 4 of the 12-pin receptacle):Voltage Levels When a PLC Power and I/O Cable is UsedWhen a PLC power and I/O cable is used, the following voltage requirements apply to the inputs tothe PLC power and I/O cable. The PLC power and I/O cable will adjust the voltages to the levelsrequired at the camera’s I/O input lines (see the previous table).Different voltage levels apply depending on whether you are using a standardPower and I/O cable or a PLC Power and I/O cable (see below).Voltage Significance+0 to +24 VDC Operating voltage.+0 to +1.4 VDC The voltage indicates a logical 0.> +1.4 to+2.2 VDCRegion where the transition threshold occurs; the logical state is not defined in this region.> +2.2 VDC The voltage indicates a logical 1.Table 2: Voltage Requirements for the I/O Inputs When Using the Standard I/O CableVoltage Significance+0 to +24 VDC Operating voltage.+0 to +8.4 VDC The voltage indicates a logical 0.> +8.4 to+10.4 VDCRegion where the transition threshold occurs; the logical state is not defined in this region.> +10.4 VDC The voltage indicates a logical 1.Table 3: Voltage Requirements for the I/O Inputs When Using a PLC I/O Cable
