AW00097603000 Physical InterfaceBasler aviator GigE 395.7.2 CharacteristicsThe camera is equipped with two physical input lines designated as input line 1 and input line 2.The input lines are accessed via the 12-pin receptacle on the back of the camera.As shown in the I/O line schematic, each input line is opto-isolated. See the Voltage Requirementssection for recommended input voltages and their significances. The current draw for each inputline is between 5 and 15 mA.Figure 12 shows an example of a typical circuit you can use to input a signal into the camera.For more information about input line pin assignments and pin numbering, see Section 5.2 onpage 32.123456789101112I/O In 1In 1 CtrlI/O In Gnd12-PinReceptacleYourGndYourGndInputVoltage+0 to 24VDCCameraFig. 12: Typical Input Circuit (Simplified)CurrentLimiter
