Physical Interface AW0009760300036 Basler aviator GigE5.4.3 PLC Power and I/O CableAs with the standard power and I/O cable described in the previous section, the PLC power andI/O cable is a single cable that both connects power to the camera and connects to the camera’sI/O lines. The PLC power and I/O cable adjusts the voltage levels of PLC devices to the voltagelevels required by the camera and it protects the camera against negative voltage and reversepolarity.Close proximity to strong magnetic fields should be avoided.Basler offers PLC power and I/O cables in several lengths. Each cable is terminated with a 12-pinHirose plug (HR10A-10P-12S) on the end that connects to the camera. The other end isunterminated. Contact your Basler sales representative to order the cable.For more information about applicable voltage levels, see Section 5.7.1 on page 38.We recommend using a PLC power and I/O cable if the camera is connectedto a PLC device.If power for the I/O input is supplied at 24 VDC, you can use a PLC power andI/O cable when the camera is not connected to a PLC device.
