Specifications, Requirements, and Precautions2 Basler sprint Mono Cameras1.2 General Specifications1.2.1 Camera Models with 2k PixelsSpecification spL2048-39km spL2048-70km spL2048-140kmSensor Size 2 lines - 2048 pixels per lineSensor Type Monochrome linear CMOSPixel Size 10 μm x 10 μmCamera LinkClock Speed40 MHz 40 MHz or 80 MHz (switchable)MaximumLine Rate38.6 kHz 70 kHz 140 kHz (in dual lineacquisition mode)MinimumLine Rate1 kHzData Output Type Camera Link base configuration Camera Link medium/fullconfigurationData Output Modes 2 tap - 8, 10, or 12 bit 2 tap - 8, 10, or 12 bit4 tap - 8, 10, or 12 bit8 tap - 8 bitSynchronization Via external trigger signal or free runExposure Control Edge controlled, level controlled, or programmableGain and Offset Programmable via a serial linkConnectors One, 6-pin, Hirose micro-miniature receptacleOne, 26-pin, female MDR connectorsOne, 6-pin, Hirose micro-miniature receptacleTwo, 26-pin, female MDRconnectorPowerRequirements+12 VDC (± 10%)Max 5.0 W @ 12 VDC when set for the single line acquisition modeMax 6.0 W @ 12 VDC when set for all other line acquisition modesLens Adapter F-mount, M42, C-Mount (see Section 1.3 on page 5)Housing Size(L x W x H)48.0 mm x 87.0 mm x 62.0 mm (without lens adapter or connectors)84.9 mm x 87.0 mm x 62.0 mm (with F-mount adapter and connectors)Weight ~ 360 g (without lens adapter)Table 1: General Specifications for 2k Cameras
