Specifications, Requirements, and Precautions8 Basler sprint Mono Cameras1.3.2.2 Adapting with the M58 x 0.75_/_V-Basler Lens MountThe following example illustrates the use of the M58 x 0.75_/_V-Basler lens mount, connected toan assembly of further optical components, including a UNIFOC 76 helical mount, an M39 x 26 tpiadapter, and an Apo-Componon 4.5/90 lens by Schneider-Kreuznach. The UNIFOC 76 helicalmount allows adjusting its extension over a range of 25.7 mm.The assembly shown in Figure 3 as an example, is adjusted for a magnification of 1:0.3. The overalllength of the adjusted assemblage including the camera (with connectors) is ca. 185.1 mm. Takingaccount of the working distance of the Apo-Componon 4.5/90 lens of ca. 362 mm, the overalldistance between the imaged object and the camera’s back (with connectors) is ca. 547.1 mm.Fig. 3: Using the M58 x 0.75_/_V-Basler Lens Mount (Distances in mm)M58 x 0.75_/_V-Basler lens mountV mount V-Basler mountM58 mountM39 x 26 tpimountCameraUNIFOC 76 helical mountM39 x 26 tpi adapterApo-Componon 4.5/90 lensPhotosensitive surfaceof the CMOS sensor1544.0(min. 40.8, max.66.5) 55Drawing not to scale11432.6
