Configuring the CameraBasler sprint Mono Cameras 185Lookup Table Value CSRRegister Base Address: 0x4111Field Name: Register Status Offset: 0x0000 Size: 1 Byte Type: Read onlyDescription: The integer value in this field indicates the status of this control and status register:0x00 = The register is not available0x01 = The register is available and all related settings are OK0x80 = A value in the register is set out of rangeField Name: Lookup Table Value Offset: 0x0001 Size: 1 Byte Type: Read/WriteDescription: Writing an integer to this field enters a value into the camera’s lookup table at the index currentlyspecified by the lookup table index CSR.See Section 6.6 on page 141 for more information about the lookup table feature.Field Name: Min Offset: 0x0002 Size: 1 Byte Type: Read onlyDescription: Minimum allowed integer value for a lookup table value.Field Name: Max Offset: 0x0003 Size: 1 Byte Type: Read onlyDescription: Maximum allowed integer value for a lookup table value.Field Name: Increment Offset: 0x0004 Size: 1 Byte Type: Read onlyDescription: An integer value indicating the increment for the lookup table value.
