Configuring the Camera178 Basler sprint Mono CamerasShading Mode CSRShading Value Generate CSRRegister Base Address: 0x2000Field Name: Register Status Offset: 0x0000 Size: 1 Byte Type: Read onlyDescription: The integer value in this field indicates the status of this control and status register:0x00 = The register is not available0x01 = The register is available and all related settings are OK0x80 = A value in the register is set out of rangeField Name: Mode Offset: 0x0001 Size: 1 Byte Type: Read/WriteDescription: Writing an integer to this field sets the shading correction mode:0x00 = Shading correction disabled0x01 = Enable DSNU shading correction only0x02 = Enable PRNU shading correction only0x03 = Enable DSNU and PRNU shading correctionSee Section 6.3 on page 121 for more information about the shading correction feature.Register Base Address: 0x2100Field Name: Register Status Offset: 0x0000 Size: 1 Byte Type: Read onlyDescription: The integer value in this field indicates the status of this control and status register:0x00 = The register is not available0x01 = The register is available and all related settings are OK0x02 = The generation process failed0x80 = A value in the register is set out of rangeField Name: Generate Offset: 0x0001 Size: 1 Byte Type: Read/WriteDescription: Writing an integer to this field sets the shading correction mode:0x00 = No generation0x01 = Generate DSNU correction values0x02 = Generate PRNU correction values and do not use DSNU correction during generation0x03 = Generate PRNU correction values and use DSNU correction during generationSee Section 6.3 on page 121 for more information about the shading correction feature.
