Specifications, Requirements, and Precautions4 Basler sprint Mono Cameras1.2.3 Camera Models with 8k PixelsSpecification spL8192-20km spL8192-39km spL8192-70kmSensor Size 2 lines - 8192 pixels per lineSensor Type Monochrome linear CMOSPixel Size 10 μm x 10 μmCamera LinkClock Speed40 MHz 40 MHz or 80 MHz (switchable)MaximumLine Rate19.4 kHz 38.6 kHz 70 kHzMinimumLine Rate1 kHzData Output Type Camera Link mediumconfig.Camera Link medium/full configurationData OutputModes2 tap - 8, 10, or 12 bit4 tap - 8, 10, or 12 bit2 tap - 8, 10, or 12 bit4 tap - 8, 10, or 12 bit8 tap - 8 bitSynchronization Via external trigger signal or free runExposure Control Edge controlled, level controlled, or programmableGain and Offset Programmable via a serial linkConnectors One, 6-pin, Hirose micro-miniature receptacleTwo, 26-pin, female MDR connectorsPowerRequirements+12 VDC (± 10%)Max 10.0 W @ 12 VDC when set for the single line acquisition modeMax 13.5 W @ 12 VDC when set for all other line acquisition modesLens Adapters Sets of optical components including a helical mount or a lens mount with V-BaslerinterfaceHousing Size(L x W x H)49.0 mm x 92.0 mm x 102.0 mm (without optical components or connectors)53.5 mm x 92.0 mm x 102.0 mm (without optical components, with connectors)Weight ~ 580 g (without optical components)~ 1480 g (with UNIFOC 100/95_/_V-Basler helical mount)~ 780 g (with M58 x 0.75_/_V-Basler lens mount)Table 3: General Specifications for 8k Cameras
