Revision HistoryBasler sprint Mono Cameras 217Revision HistoryDoc. ID Number Date ChangesAW00016201000 5 Dec 2006 Draft version for review only.AW00016202000 1 Feb 2007 Preliminary version. Applies to prototypes only.AW00016203000 11 Jul 2007 First release covering production cameras.AW00016204000 25 Oct 2007 Updated the camera version ID number stated in Section 1.1 on page 1.Updated the specification tables in Section 1.2 on page 2.Updated the warranty precautions on page 22.Added information about the switchable Camera Link clock speed toSection 2.8.4 on page 35.Added information about a new dual line acquisition mode to Section 3.1 onpage 39 and Section 3.3 on page 41.Updated the line valid delay values in Table 12 on page 91, Table 15 onpage 98, and Table 19 on page 107.Updated the description of the line stamp feature in Section 6.5 onpage 136.Updated the line contrast formula on page 140.Updated the descriptions of the microcontroller firmware version and FPGAfirmware version inquiry registers on page 154.Added the description of the Camera Link clock speed control and statusregister on page 166.AW00016205000 8 Jan 2008 Removed the section of the manual that describes camera installation. Theinstallation procedure is now available as a separate document.Updated the camera version ID number stated in Section 1.1 on page 1.Updated the specification tables in Section 1.2 to include new 2k and 4kcamera models.Added Section 1.3 on page 5, which describes the available lens adapters.Updated Section 2.1 on page 24 and Section 2.2.3 on page 27 to show theconnectors available on the new camera models.Updated Section 2.6 on page 31 and Section 2.8.4 on page 35 to describethe Camera Link configuration available on the new camera models.Updated Section 3 on page 39 and Section 3.3 on page 41 to clarify theline acquisition modes available on each camera model.Corrected the description of Vertical Binning Line Acquisition mode inSection 3.4 on page 49 and the description of the horizontal binning featurein Section 3.8 on page 59.Updated the exposure start delays listed in Table 9 on page 70.Updated the formulas and descriptions throughout Section 4.3 on page 74to include information relevant to the new 2k and 4k camera models.(Continued on the next page.)
