Interface Statistics Screen2H23-50R/2H33-37R User’s Guide5-83CLEAR COUNTERS (Command)This command clears all the counters of the displayed ports to zero. Toclear the counters, use the arrow keys to highlight CLEAR COUNTERSat the bottom of the screen, then press ENTER.5.24 INTERFACE STATISTICS SCREENThe Interface Statistics screen, Figure 5-31, is used to gather MIB-IIstatistics for all the 2H23-50R or 2H33-37R interfaces with the exceptionof an installed HSIM in a 2H33-37R.To access the Interface Statistics screen, use the arrow keys to highlightthe INTERFACE STATISTICS menu item on the Device StatisticsMenu screen and press ENTER. The Interface Statistics screen displays.Figure 5-31 Interface Statistics ScreenNOTECabletron Systems HSIMs gather their own statistics that maybe viewed via the Local Management screens of the applicableHSIM. Refer to your HSIM documentation for information onhow to access these screens.Firmware Revision: XX.XX.XXInterface Statistics22861_64BOOTPROM Revision: XX.XX.XXRETURNDevice Typee: 2H23-50R2H23-50R LOCAL MANAGEMENTEvent Message LineInterface: [nn]InOctets:InUnicast:InNonUnicast:InDiscards:InErrors:InUnknownProtos:OutOctets:OutUnicast:OutNonUnicast:OutDiscards:OutErrors:OutQLen:Name: Ethernet Frontpanel750045667890000000000CLEAR COUNTERS EXITInterface: 1Address:Last Change:Admin Status:Oper Status:MTU:Speed:Link Status:Duplex Mode:00-00-00-00-00-00xx days 00:00:00UpDown1514100000000No LinkStandard
