Repeater Statistics Screen2H23-50R/2H33-37R User’s Guide5-95Admin Status (Read-only)Indicates if the network or port is enabled (Enabled) or disabled(Disabled).NETWORK # (Command)This command is used to select a particular Network to view its statistics.When the Network is selected the statistics are also displayed for the firstport in the Network under Port #. For details, refer to Section 5.26.1PORT # (Command)This command is used to select a particular Port to view its statistics andthose of its associated Network. For details, refer to Section 5.26.2.CLEAR COUNTERS (Command)This command sets all statistics counters to zero. For details on how touse this command, refer to Section 5.26.3.5.26.1 Displaying Network StatisticsTo display the statistics of any Network, proceed as follows:1. Use the arrow keys to highlight the NETWORK # command field atthe bottom of the screen.2. Press the SPACE bar to increment or press the BACKSPACE key todecrement the port number.3. Press ENTER (the NETWORK #, the first PORT # of the Network,and the associated statistics do not display until ENTER is pressed).5.26.2 Displaying Network Port StatisticsTo display the statistics for any repeater port, proceed as follows:1. Use the arrow keys to highlight the PORT # command field at thebottom of the screen.2. Press the SPACE bar to increment or press the BACKSPACE key todecrement the port number.3. Press ENTER (the PORT #, the NETWORK # of the associatednetwork, and the statistics do not change until ENTER is pressed).
