RMON Statistics Screen2H23-50R/2H33-37R User’s Guide5-91512 – 1023 Octets (Read-only)Displays the total number of frames, including bad frames, received thatwere between 512 and 1023 bytes in length (excluding framing bits, butincluding FCS bytes).1024 – 1518 Octets (Read-only)Displays the total number of frames, including bad frames, received thatwere between 1024 and 1518 bytes in length (excluding framing bits, butincluding FCS bytes).Index [nn] (Command)This command is used to enter an index number for viewing statistics. Forinstructions on how to use this command, refer to Section 5.25.1.CLEAR COUNTERS (Command)This command is used to reset all statistic counters to zero. For details onhow to use this command, refer to Section 5.25.2.5.25.1 Displaying RMON StatisticsTo display the statistics for any index, proceed as follows:1. Use the arrow keys to highlight the Index [nn] field at the bottom ofthe screen.2. Press the SPACE bar to increment (or press the DEL [delete] key todecrement) the index number.3. Press ENTER (neither the RMON Index # field nor the statisticschange until ENTER is pressed).5.25.2 Using the Clear Counters CommandTo reset all the statistics counters of the selected interface to zero, performthe following steps:1. Use the arrow keys to highlight the CLEAR COUNTERS field.2. Press ENTER, the counters for the selected index are reset to zero.
