SNMP Community Names Screen2H23-50R/2H33-37R User’s Guide5-355.8.1 Establishing Community NamesThe password used to access Local Management at the Password Screenmust have super-user access to view and edit the SNMP CommunityNames screen. Using a password with read-only or read-write access doesnot allow the user to view or edit the SNMP Community Names screen.To establish community names, proceed as follows:1. Use the arrow keys to highlight the Community Name field adjacentto the selected access level.2. Enter the password in the field (maximum 31 characters).3. Press ENTER.4. Repeat steps 1 through 3 to modify the other community names.5. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER. The message “SAVED OK” displays.The community names are saved to memory and their access modesimplemented.NOTEAny community name assigned in the SNMP CommunityNames screen is a password to its corresponding level ofaccess to Local Management.The community name assigned super-user access is the onlyone that gives the user complete access to Local Management.NOTEExiting without saving causes a “NOT SAVED?” message todisplay. Edits are lost if they are not saved before exiting.
