Chapter 5: Local Management5-82H23-50R/2H33-37R User’s Guide5.4 ACCESSING LOCAL MANAGEMENTAccess to Local Management is controlled through the LocalManagement Password screen shown in Figure 5-3. Whenever aconnection is made to the 2H23-50R or 2H33-37R the LocalManagement Password screen displays. Before continuing, the user mustenter a password (community name) which is compared to the previouslystored passwords. The level of access allowed the user depends on thepassword. To set or change passwords, refer to Section 5.8. The followingsteps describe the procedure to access Local Management.1. Turn on the terminal. Press ENTER (this may take up to four times,because the COM port auto-senses the baud rate of the terminal) untilthe 2H23-50R or 2H33-37R Local Management Password screendisplays. It is the automatic line speed seeking feature of the port thatmakes it necessary at times to press ENTER several times.Figure 5-3 Local Management Password Screen2. Enter the Password and press ENTER. The default super-user accesspassword is “public” or press ENTER.2H23-50 LOCAL MANAGEMENTCABLETRON Systems, IncorporatedP.O.Box 5005Rochester, NH 03866-5005 USA(603) 332-9400(c) Copyright CABLETRON Systems, Inc, 1998Device Serial Number: XXXXXXXXXDevice Hardware Revision: XXDevice Firmware Revision: X.XX.XXDevice BOOTPROM Revision: X.XX.XXEnter Password:22861-12Event Message Line
