Cabletron Systems CyberSWITCH CSX200 User Manual

Also see for CSX200 CyberSWITCH: Installation guide Setup guide Configuration guide User guide

Contents

General Configuration Using Local Management92CSX200 Family User’s GuideTable 11 describes the most common event messages. Event messages related to specific LocalManagement applications are described with those applications throughout this manual.Display Fields — Display fields cannot be edited. These fields may display information whichnever changes, or changes as the result of Local Management operations, user selections, ornetwork monitoring information.Input Fields — Input fields require keyboard characters to be entered. IP addresses, System Date,and System Time are examples of Input fields.Selection Fields — Selection fields provide a series of possible values. Only applicable valuesappear in Selection fields.Command Fields — Command fields are located at the bottom of Local Management screens.Command fields are used to exit Local Management screens and to save Local Managemententries. Command fields perform a management action simply by being selected and activated.Only command fields can make a change to a device’s configuration.Table 11 Event MessagesMessage MeaningSAVED OK One or more fields were modified,and saved to NVRAM.NOT SAVED?--PRESS SAVE TOKEEP CHANGESOne or more fields were modified,but not yet saved to NVRAM.NOTHING TO SAVE The SAVE command was executed,but nothing was saved to NVRAM.