Cabletron Systems CyberSWITCH CSX200 User Manual

Also see for CSX200 CyberSWITCH: Installation guide Setup guide Configuration guide User guide

Contents

WAN Configuration Using Local ManagementCSX200 Family User’s Guide 139Figure 66 shows a sample Time Slot configuration for three sites. Of the 24 Time Slots, Site #1uses 16 to communicate with Site #2 and the remaining 8 to communicate with Site #3. Thisconfiguration varies tremendously depending on how the service provider maps out the T1 TimeSlots. Your service provider will tell you which Time Slots are active.Figure 66 Sample Time Slot ConfigurationSite #1 is using the full T1, so all the Time Slots must have an Interface assignment. Site #2 andSite #3 use only a fraction of the T1, but the total quantity of Time Slots must match those of Site#1. Unused Time Slots receive an Interface number of 000.NOTEThe Interface numbers of Site #1, Site #2 and Site #3 do not have to match. Only thequantity of Time Slots must match (the service provider assigns the Time Slots).SITE #201-0809-1617-24SITE #301-0809-1617-24SITE #101-0809-1617-241482_03005005000005005000005005000005005000005005000005005000005005000005005000006000000006000000006000000006000000006000000006000000006000000006000000005005006005005006005005006005005006005005006005005006005005006005005006