CHAPTER 6: LOCAL MANAGEMENT6-2SEHI USER’S GUIDE6.1 MANAGEMENT TERMINAL REQUIREMENTSUse one of the following systems to access Local Management:• A Digital Equipment Corporation VT series terminal• A VT type terminal running emulation programs for the DigitalEquipment Corporation VT series• An IBM or compatible PC running a VT series emulation softwarepackageAn RJ45 console cable is used to attach the management terminal to theSEHI. The console cable is not included with the SEHI but may bepurchased separately from Cabletron as part number SEHI-ACCY-KIT(this accessory kit also includes rackmount hardware).The SEHI-ACCY-KIT package provides an RJ45 Cable Kit that includesthe following:• UTP console cable with RJ45 connectors on each end• Adapters for DB9 or DB25 connections• Instruction SheetThe following sections explain how to attach the console cable and set upthe management terminal. Refer to the RJ45 Cable Kit Instruction Sheetfor adapter pinouts and additional information.6.1.1 Console Cable ConfigurationUse the RJ45 Cable Kit provided with the SEHI-ACCY-KIT package toattach the management terminal to the SEHI COM port as shown inFigure 6-1.Connect the console cable to the SEHI as follows:1. Attach the male RJ45 connector to the COM port of the SEHI.
