CHAPTER 6: LOCAL MANAGEMENT6-10SEHI USER’S GUIDE6.3.2 The Configuration ScreenTo access the Configuration screen from the Feature Selection screen, usethe arrow keys to highlight the IP Address Assignment option, then pressthe Return key or F7. The Configuration screen shown in Figure 6-5appears.Figure 6-5. Configuration ScreenAssign the IP Address, Subnet Mask, and Default Gateway through theSEHI Configuration screen. Use the Port Enable Override option toenable all device ports in the stack. This option overrides the Port Disablesetting in the Statistics screen.The following sections explain each field on the Configuration screen andinstructions on how to change them.I/FGives the number of the interface corresponding to the channels overwhich packets with that IP Address are passing. On the SEHI, this value isalways 1.Cabletron SEHI Revision X.XX.XXCONFIGURATIONSEHI LOCAL MANAGEMENTSAVE COMMUNITY NAMES TRAP TABLE SNMP TOOLS RETURNF6 F7 F8 F9I/F IP Address SubNET Mask MAC Address1 000.000.000.000 000.000.000.000 00-00-1d-05-dc-36Default Gateway: 0.0.0.0Serial Port 1 Application: CONSOLE Baud Rate: 9600 --ACTIVE--Port Enable Override: OVERRIDE DISABLED1490_24