USING THE LOCAL MANAGEMENT SCREENSSEHI USER’S GUIDE6-9Editing the Community Name FieldThe password used to access Local Management at the Password screenmust have Super-User privileges for the edits to take effect. If a passwordis entered with Basic-Read, Read-Only, or Read-Write privileges, LocalManagement displays the message “AUTHORIZATION PROHIBITSACCESS”, and does not include editing capabilities.To edit the Community Name field:1. Use the arrow keys to highlight the Community Name field adjacentto the desired access level.2. Enter the community name, up to 32 characters in length, into thefield.3. Press the Return key.4. Repeat steps 1-3 for editing any of the other community names.5. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen, then press the Return key or F6. The “SAVED OK”message appears indicating that the edits have been saved to memory.Please note that the first time a user attempts to exit the screenwithout saving the changes, a “NOT SAVED?” message is displayed.The edits are lost if the user proceeds to exit without saving thechanges.6. To exit the screen, press the appropriate Function key or use the arrowkeys to highlight the RETURN command.7. Press the Return key. The Feature Selection screen appears.
