Configuring BSCI Devices8-9BSC Interactive ConfigurationAdding or Modifying BSCI Subscriber InformationTo add a new BSCI Subscriber entry:1. Enter the Local Subscriber ID, the Remote Subscriber ID, and the otherconfigurable parameters for the entry.2. Click on to add your new entry.To modify an existing entry:1. In the list box, click to select the Subscriber entry you wish to modify. Theselected entry will be highlighted. (Note that you can only modify one entry ata time.)2. Edit the fields, as desired. If you have made some changes but would like toreturn to the original values, click on the Refresh button.3. Click on to modify the selected entry.To delete an existing entry:1. In the list box, click to select the Subscriber entry you wish to delete. Theselected entry will be highlighted. (Note that you can only delete one entry ata time.)2. Click on to delete the selected entry.Applying Port-level ChangesAfter you have made any port-level configuration changes, your changes will nottake effect until you have done an on-line update. To do so:1. Click mouse button 3 on the port you have been configuring to display the PortMenu.2. Drag down to On-line Update and release.Configuring BSCI DevicesAfter you have configured the port and subscriber information discussed in theprevious two sections, you must also define the devices connected to those BSCIports.You do this via the BSCI Device Information window. To access the window:1. Click mouse button 3 on the BSCI port of interest to display the Port Menu.2. Drag down to BSCI Device Configuration, and release. The BSCI DeviceInformation window, Figure 8-3, will appear.
