Speed Dial Configuration12-5SmartSwitch 1800 Voice ConfigurationMinimum Voice RateThis field specifies the minimum operating rate (in bits per second) of all voicechannels when congestion occurs. The default value for this parameter is 4800bps.Maximum Voice RateThis field specifies the maximum operating digitization rate (in bits per second) ofall voice channels. The default value for this parameter is 64000 bps.Changing Parameter ValuesYou can edit the values in any field which provides a text box or menu buttonselection; to do so:1. To edit a text field, remove the existing value and enter the new value.2. To edit a field with a menu button, click on the button to display a list ofoptions, then drag down to select the option you want.3. Click on to save your changes.Speed Dial ConfigurationThe Voice Speed Dial Configuration window contains the dial numbers (similar totelephone numbers) that can be used to call remote devices. The table associateseach of these numbers (called long-dial numbers) with a shorter (usually)speed-dial number that can be used to call the device, as well as any configuredextended-dial digits that will be forwarded by the device.To access the window:1. Click on to display the Device menu.2. Drag down to Voice Speed Dial Configuration, and release. The VoiceSpeed Dial Configuration window, Figure 12-2, will appear.NOTEAfter you have made system-level changes (such as configuring voice parameters), youmust apply those changes by rebooting the FRX or SmartSwitch 1800 device, or throughconsole management via the [F7] command.
