Using the FRX4000, FRX6000, and SmartSwitch 1800 Hub View2-16Monitoring Hub PerformanceViewing Device InformationThe Device Information window provides some general descriptive informationabout the FRX or SmartSwitch 1800 device you are modeling.To access the window:1. In the Hub View, click on to display the Device menu.2. Drag down to Device Information, and release. The Device Informationwindow, Figure 2-6, will appear.Figure 2-6. The Device Information WindowDevice information includes:System Description Displays the MIB II sysDescr for the selected device; thisdescription typically includes information about thefirmware version currently running.System Contact Displays the MIB II sysContact value; this value is settablevia the generic MIB I, II application (accessible from theDevice menu, the icon menu, or from the command line).See the SPMA Tools Guide for a detailed description ofthe MIB I, II application and how to set this value.Configuring RLP ProtocolsThe RLP Configuration window provides information about the status of eachdisplayed RLP and lets you view and configure the protocols loaded onto theselected RLP.To access the window:1. In the Hub View, click on the appropriate Module Index or Module Name textbox to display the RLP Menu (see Figure 2-3, page 2-6).2. Drag down to Configuration, and release. The RLP Configuration window,Figure 2-7, will appear.
