Frame Relay Status and Configuration5-8Configuring Frame Relay PortsChanging Configuration ValuesYou can edit the values in any field; to do so:1. To edit a text field, remove the existing value and enter the new value.2. To edit a field with a menu button, click on the button to display a list ofoptions, then drag down to select the option you want.If you have made changes to the fields but would like to revert back to theprevious values, click on the Refresh button.3. Click on to save your changes.Applying Port-level ChangesAfter you have made any port-level configuration changes, your changes will nottake effect until you have done an on-line update. To do so:1. Click mouse button 3 on the port you have been configuring to display the PortMenu.2. Drag down to On-line Update and release.DLCI Rate ConfigurationThe Frame Relay DLCI Rate Configuration window allows you to settraffic-related operational parameters for each DLCI configured for a selectedframe relay port. Note that the values for these parameters will typically be set byyour frame relay provider; they cannot be freely altered.To access the window:1. Click mouse button 3 on the frame relay port of interest to display the Portmenu.2. Drag down to Frame Relay DLCI Rate Configuration, and release. TheFrame Relay DLCI Table window, Figure 5-2, will appear.NOTEWhen configuring DLCI rate values in this window, be sure to use the DLCI identifierswhich apply to the logical ports configured for the serial port you’ve selected.
