Configuring IPX Interfaces10-9IPX Interface ConfigurationRIP Max SizeThis is the maximum RIP packet size (in bytes), including the IPX header (30bytes) and the LAN MAC header (if transmitted on a LAN interface). The defaultvalue for this parameter is 446.Max VCThis parameter is only configurable if you have selected X.25 as your InterfaceType. It specifies the maximum number of virtual circuits over which IPX trafficwill be transmitted in parallel. The default value for this parameter is 1.Adding or Modifying IPX InterfacesFirst, access the IPX Interface Configuration window (see Configuring IPXInterfaces, page 10-2).To add a new IPX interface:1. Enter the IPX Interface Number, the IPX Interface Type, and the otherconfigurable values for each interface.2. Click on to add your new entry.To modify an existing entry:1. In the list box, click to select the IPX Interface you wish to modify. Theselected entry will be highlighted. (Note that you can only modify one entry ata time.)2. Edit the fields, as desired. If you would like to return to the original values,click on the Refresh button.3. Click on to modify the selected entry.To delete an existing entry:1. In the list box, click to select the IPX Interface you wish to delete. The selectedentry will be highlighted. (Note that you can only delete one entry at a time.)2. Click on to delete the selected entry.NOTEAfter you have made system-level changes (such as configuring an IPX Interface), youmust apply those changes by rebooting the FRX or SmartSwitch 1800 device, or throughconsole management via the [F7] command.
